WIRE MESH (IN ANY METAL) WORM DRIVE HOSE CLIPS WIRE MESH (IN ANY METAL)
C.A.F. JOINTING SHEETS Non Metalic & Metalic Red, Black, Graphited From 0.4 mm to 6.0 mm thick.
Width 1.5 mtrs. x 1.5 mtrs. / 1.5 mtrs. to 5.0 mtrs., for various applications.
ASBESTOS PACKING Asbestos Graphite gland packing, Asbestos White Round / Square Packing, Asbestos Packing impregnated with PTFE, Asbestos with Brass, Copper, S.S. Inconel Wire, Asbestos Webbing Tape, Asbestos Cloth, etc.
NON ASBESTOS PACKING Pure PTFE
Packing, Pure Lubricated PTFE Packing,Pure and Aramid Fibre Packing, Tank Lid Packing, PTFE Aramid Packing, PTFE Aramid Packing, PTFE / Graphite / Aramid Packing, etc., Cotton / Hemp Packing.
ASBESTOS MILL BOARD SHEET Manufactured from a choice blend of selected Asbestos Fibre, free from iron. The incombustible and Heat Resistant filler from iron. The incombustible and Heat Resistant filler anf the bindling material. Does not suffer any appreciable loss of strength at service temperature upto approx.
500 °C.(932° F.)
Size : 1.0 mtr. x 1.0 mtr.
Thick : From 1.5 mm to 25.0 mm
BAKELITE SHEETS & FIBRE RODS Fabric Based / Paper Based sheets
Size : 4Ft. x 8 Ft. or 4Ft. x 4 Ft.
Thick : 1.0 mm to 100mm
Fibre Rods & Tubes
Dia : 6.0 mm to 12" x 1 mts. long
Bearing & Slipper Pads, Moulded Block for Shuttles, Shuttering films.
COMPRESSED WOLLEN FELTS Composed mainly from Australian Wool, mainly Nused for Insulation, Dampening, Sound Deadening and Sound
Proofing, Coating, Decorating, Cleaning, Polishing, Surface prepartion, filtering, Dust collection, etc.
Thick : 1.0mm to 40.0mm
Density : 0.18 gm / ccm to 0.45 gm / ccm ( Soft, Medium Soft & Hard)
Width : 1.7 to 2.0 mtrs.
Length : 5.0 mtrs to 7.0 mtrs.
Colour : White, Creamish White & Grey
RUBBERISED / PLAIN CORK SHEETS
Mainly used in :-
Autombiles - Gaskets for Engine, Gear Boxes, Oil Cans, etc. Transformer - Ideally insulate, prevent leaks Machinery - Anywhere an effective seal is required for tightening up.
Size : 2' x 3' , 3' x 3'and 1 mtr x 1 mtr, Thick : 1.0 mm to 15.0 mm
S.S. PIPE FITTINGS, FLANGES For your requirment in S.S. Pipe Fitting from 1/4'" to 32" in all thickness in seamless, ERW, EFW. Welded and Fabricated Buttwelded type all conforms to ASTM - DIN - BS - ASA - JIS - ISI. Specification : Type - 304, 304L, 309, 310, 316, 316L, 317, 347 Shapes : In Shapes of Elbows, Tees, Bends, Stubends, Reducers & Flanges. Also S.S. Forge Fitting in 182 F Grade in Grade in Socket weld & screwed type.
ASBESTOS C.A.F. JOINTING SHEETS (NON METALIC & METALIC)
